What?

What is Dowel Fixed? Dowel fixed is the used of a small piece of cylindrical wood that when glued in place, provide a strong, durable woodworking joint. How to Install in Single Sided Fittings? Dowel fixed are simply glued in. a) Dob of wood glue in each hole as well as the predrilled door holes b) Insert the dowel into the handle holes. c) Slide the glued dowels into the door holes e) Clamp firmly until the glue is dry* *Check the glue instructions for drying time How to In...

What is a Concealed Fitting? The concealed fitting is used when you don’t want to see the head of the screw on the rear side of the door e.g. an Entry door. It is not needed if the doors are for cupboards as the rear is not seen. If that is the case, then concealed fitting can be removed. Types of Concealed Fitting Hardware 1. Disk - used for Single Sided Round Handles size 90mm and larger. Please see link below for the instruction on how to install it. https://auburnwoodturning.com.au/how...

You might be asking what kind of lock or latch you need with our timber pull handles. You will need a dead lock to use in conjunction with the pull handle. These can be purchased at most door hardware suppliers. The lock can be installed to the side, below or above the handle depending on your preference. Some examples below.